In stock, ready to ship!

Please note that this rail is assembled by hand and fine tuned for macrophotography with custom-made parts. Please calculate always a few days for shipping your order.

*** Intermediate level rail, recommended for indoor use and magnifications up to 50X ***

This is the QOOL Set with the new IR / WIFI / USB -Controller!

The Qool Rail is an excellent choice for studio and home focus stacking work. It is recommended up to 50X and but we have some customers who are working up to 100x magnification with the Qool Rail. The minimum step size for this rail with 2mm pitch screw is 0.078125 μm (yes, it's really μm, so 0.000078125 mm) with the IR Controller, but practical step size is 0.3125 μm as we do not have equipment to test further. For higher magnifications and absolute precision you should look for the Ultra Rail Series.

The included new IR / WIFI / USB controller works as stand alone or can be connected via WIFI or USB to the PC. No laptop, PC or smartphone is required if operated with the remote control. All settings are done with the remote control and can be saved. A 12V power supply is included in this kit but you can also use a Li-Ion battery pack to operate the rail for example outdoors. If you plan to use the QOOL also outdoors we recommend to add the tripod mount plate and if needed the square arca swiss quick release system to your order.

If you have a camera that does not support wired shutter cables you can choose the kit with the USB-controller. You can control the shutter of your camera automatically with Sony Remote, Canone EOS Utiliy or Capture One.

The rail is fully assembled, tested and fine tuned. Every single part is replaceable.

Variants to choose for your order:

1.) Length (required)

Please choose between the 200 mm or the 250 mm long rail. The travel range for the shorter variant is 120 mm, while the longer variant offers 170 mm of travel.

Length:

Short: 200 mm with 120 mm travel range
Long: 250 mm with 170 mm travel range (+ € 20.00)

2.) Aluminium boards (optional)

Recommended are aluminium boards on which you can mount the Qool rail. Included are all necessary screws, joining plates, t-nuts, ect.

Aluminium board versions:

Black-matte (2 x 25 cm) (+ € 19.00)
Black-matte (2 x 30 cm) (+ € 25.00)

3.) Shutter Release Cable (required)

Please choose a shutter release cable for your camera. You can find the compability list in the product description below.

This kit includes:

- Black anodized fully assembled QOOL Rail with 2mm pitch screw
- MJKZZ IR-Controller with 2 remote controls
- Nema 23 motor (high precision with 400 steps per turn)
- High quality membrance coupler
- 60mm round Arca-Swiss camera clamp with positioning poles
- Power Supply (EU plug)
- 1x Camera shutter cable of choice (see options below)
- Screws, T-nuts and allen keys
- Batteries
- Travel distance 120 mm
- Size: Length 30 cm x Width 8 cm
- Weight: 2kg (exclude camera, but with camera clamp)

We recommend to add two aluminium rails to your order to fix the Qool rail onto the table. Connectors, screws and t-nuts will be included automatically.

FREE SHIPPING to EU countries on next day! No customs fees and import VAT inside EU! We ship worldwide from Austria/Germany (Europe)!

Please select your shutter release cable:

Canon RS-C1 (2,5mm) compatible with

Canon EOS R, 60D, 70D, 77D, 80D, 1100D, 1000D, 750D, 600D, 550D, 500D, 450D, 400D, 350D, 300D, Rebel T1i, T2, T2i, T3, T3i T4i, T5, T5i, T6i, T6s, SL1, SL2, XSi, Rebel XS, Rebel XTi, Rebel XT, Rebel, Kiss X3 Digital, Kiss X2, Kiss X, Kiss N, Kiss F, Kiss, EOS ELAN 7/7E, ELAN 7NE, ELAN II/IIE, Rebel 2000, Rebel GII, Rebel G, Rebel T2, Rebel Ti (uses Canon E3 connector), and others...
Canon Powershot G16 / G10 / G11 / G12 / G15 / G5x / G3x / G1x / G1x Mk II, and others...
Olympus OM-D E-M1 Mark II, OM-D E-M1X, OMD EM1 Mark III, E-M5 Mark III, replaces original Olympus RM-CB2
Pentax 645Z, K-1, K-01, K-3, K-5, K-7, K200D, K110D, K100D, K100D Super, K20D, K10D, MZ-6, MZ-L, ZX-L, *ist D/DS/DS2/DL/DL2/K10
Contax N Digital, 645, NX, N1
Hasselblad H/H1/H2/H2D/H1D
Samsung GX-1S, GX-1L, GX-20, GX-10
Sigma SD1, SD1 Merrill, SD15

Canon RS-C3 compatible with

Canon EOS 50D, 40D, 30D, 20D, 20Da, 10D, 7D, 7D Mark II, 6D, 6D Mark II, 5D, 5D Mark II, 5D Mark III, 5D Mark IV 1Ds, 1Ds Mark II, 1Ds Mark III, 1D, 1D Mark II, 1D Mark IV, 1D-X, 1D-X Mark II, D60, D3, and others...

Nikon MC-DC2 (N3) compatible with

Nikon Z6, Z7, Df, D90, D600, D610, D750, D3100, D3200, D3300, D5000, D5100, D5200, D5300, D5500, D5600, D7000, D7100, D7200, and others...

Nikon MC-30 (N10) compatible with

Nikon D850, D810./D810A, D800/D800E, D700, D500, D300/D300S, D200, D100 (via MB-D100 battery grip), D5, D4/D4s, D3X, D3, D2H, D2X, D2Xs, D1X, D1H, D1, F100, F90X, F90, F6, F5, and others...
Kodak DSC-14n. DSC Pro SLR/n, DSC Pro SLR/c, and others...
Fujifilm FinePix S5 Pro, S3 Pro, and others...

Sony RM-VPR1 compatible with

Sony A58, NEX-3NL, A7, A7III, A7R, A7RII, A7RIII, A7SII, A9, A3000, A6000, HX300, RX100 II, RX10 IV, and others...

Sony RM-S1AM compatible with

Sony A35, A33, A35, A37, A55, A57, A65, A67, A77, A99, A550, A580, A700, A850, A900, and others...
Minolta cameras

Olympus UC1 compatible with

Pen XZ-1, E-PL2, Ep-1, Ep-2, E-P1, EVOLT E-620, E-520, E-510, E-450, E-420, E-410, E-400, E-30, SP-590UZ, SP-570UZ, SP-565UZ, SP-560UZ, SP-550UZ, SP-510UZ, OM-D E-M5, OM-D E-M5 MarkII, OM-D E-M1, E-PM2, and others...

Panasonic CL-L1 compatible with

Panasonic DMC-FZ50，DMC-FZ50K，DMC-FZ50S, DMC-FZ30，DMZ-FZ150，DMC-FZ30K, DMC-FZ30S, DMC-FZ20 and others...
Leica V-LUX 1, DigiLux 3, DigiLux 2

Fujifilm RR-100 compatible with

Fujifilm GFX 50S, GFX 50R, X-H1, X-Pro2, X-T4, X-T3, X-T2, X-T1, X-T20, X-T10, X-T100
Fujifilm X-E3, X-E2S, X-E2, X-E1, X-A5, X-A10, X100F, X100T, X70, X30, XF10

If your camera model or compatible shutter release cable is not listed please contact us.